Odenville, AL

Responded to callback for no-heat condition reported following a recent duct cleaning. Inspected the furnace and found the issue related to disturbed components from the cleaning process, including checking the thermostat, flame sensor, igniter, blower assembly, and airflow pathways. Restored proper operation, verified a complete heating cycle with normal ignition, adequate airflow, and stable supply air temperatures.

Performed a comprehensive clean and check on the unit, including a thorough cleaning of internal and external components and inspection of key operating parts for wear, damage, or irregularities. Verified proper function and confirmed the system is operating within normal parameters following completion.

Completed the first preventive protection visit on the HVAC system, which includes two heating units installed this past January. Inspected and tested both units for proper operation, and noted that no UV light is installed on the system.

Completed installation of new equipment, including mounting, connecting, and securing all components per manufacturer specifications. Performed system startup and verified proper operation, including a refrigerant charge check to confirm correct levels and optimal performance.

The service details provided for this job contain only placeholder text ("Adc. ADC - Adc") and no information about the work performed, the equipment involved, or the issues resolved. A description based on that input would require inventing details, which would make the service record inaccurate. Please provide the actual work details, such as the system or equipment serviced, the problem diagnosed, the repairs or maintenance completed, and any parts replaced. Once those are available, I can write a concise, technical description for the record.

Performed the second scheduled service agreement visit on the heating system, completing a routine inspection and maintenance of the unit. Verified the equipment is covered under its active warranty and confirmed the installed UV air treatment system is present and operating properly. System tested and left in normal working order.

Performed a complimentary indoor air quality assessment for a new customer, evaluating the existing HVAC system, ductwork condition, filtration, and ventilation for potential contaminants and airflow concerns. Discussed findings and recommended air quality solutions, such as upgraded filtration, air purification, humidity control, and duct cleaning, and provided a written estimate for the proposed improvements.

Performed a second protection plan visit on a heating system under warranty to address a persistent noise complaint following the initial service call. Inspected the unit's mechanical and airflow components to identify the source of the abnormal operating noise, and verified system operation after adjustments. The unit has no UV light installed.

Performed scheduled service agreement maintenance on the gas furnace and removed the burner assembly for inspection, revealing heavy rust, scale buildup, and corrosion on the burner tubes and ports. The cabinet interior also showed flaking paint, surface rust, and moisture-related growth along the lower panel. Cleaned and treated affected areas and verified wiring and junction box connections; recommended burner replacement and ongoing monitoring of cabinet corrosion due to moisture exposure.

Responded to a callback for a no-heat condition following a recent installation. Diagnosed the system, identified the cause of the heating failure, and made the necessary corrections to restore proper operation. Verified the system was producing heat, cycling normally, and operating within manufacturer specifications before concluding the visit.

Responded to callback and diagnosed a faulty limit switch causing improper unit operation. Removed the defective limit switch, installed a new compatible replacement, and secured all wiring connections. Tested system operation through a full heating cycle to verify the switch functions correctly and the unit operates within normal parameters.

Responded to a callback regarding overtightened filter access panel screws that prevented filter replacement. Loosened and removed the seized fasteners using appropriate tools, replaced the air filter, and reinstalled the access panel, confirming secure closure and proper system operation.

Performed a scheduled Service Agreement Visit for a newly transferred system, completing the remaining maintenance from the prior owner's agreement. Inspected system components, verified operation, and completed the outstanding preventive maintenance tasks per the service agreement.

Performed a service agreement inspection on the gas furnace with the access panel removed, examining the inducer blower motor and housing, wiring harness connections, and burner assembly. Noted light rust staining and discoloration around the inducer housing and cabinet interior, and found sealant and moisture residue at the gas valve pipe joint, with dead vegetation and debris accumulated around the base of the unit. Recommend clearing debris from around the equipment and monitoring the inducer housing and gas valve connection for corrosion or leakage.

Performed a turn over moisture control service, inspecting the property for moisture intrusion, elevated humidity, and conditions conducive to mold or microbial growth. Verified moisture levels in affected areas, addressed identified issues, and confirmed the space was properly conditioned and dry for occupancy.

Performed the first scheduled service agreement visit on the heating system, including a full inspection and routine maintenance of the unit. Verified proper operation of the installed UV air treatment component and confirmed the system's warranty coverage remains active. System tested and found operating within normal parameters.

I can't write an accurate job description from the information provided. The service details field contains only the heading "Service Agreement Visit -" with no information about the work performed, equipment serviced, findings, or repairs completed. The trade or role is also left blank ("None"), so I can't tell which industry terminology applies. To produce a concise, professional summary, please provide: - The type of equipment or system serviced (e.g., HVAC, plumbing, electrical) - Tasks performed during the visit (inspection, cleaning, testing, part replacement) - Any issues found and how they were resolved - Any recommendations or follow-up needed Once I have those details, I'll write a brief technical summary that follows your formatting and content guidelines.

I can't write an accurate job description from what was provided. The service details contain only the header "Service Agreement Visit -" with no information about the work performed, equipment serviced, or issues found. The trade is also unspecified ("None"), so I can't pick appropriate terminology. Please send the work details, such as: - The type of system or equipment serviced (e.g., HVAC, plumbing, electrical) - The inspection or maintenance tasks completed - Any problems found and how they were resolved - Parts replaced or adjustments made Once I have those, I'll write the concise, professional summary you need.

Performed second service agreement visit on two heating systems, completing scheduled maintenance inspections on all units. Systems are not manufactured by our company, and no UV lighting was present on the equipment. Both systems were serviced and left in operational condition.

Performed a scheduled service agreement visit on a heating system that was not originally installed by our company. Inspected the system and noted the presence of an installed UV air treatment device. Completed the routine maintenance and verified the equipment was operating properly at the conclusion of the visit.

Responded to a warranty service call and performed a diagnostic inspection of the unit. The visit was handled under warranty coverage, with the unit's current condition and operation evaluated and documented. Follow-up was noted pending the resolution of the return-related issue, and the appropriate parties were advised of the findings.

Performed the first scheduled service agreement visit on two heating systems, completing the seasonal inspection and maintenance under the active 12-month warranty. Systems were serviced without a UV light accessory installed.

Performed callback inspection on recently installed UV light system. Evaluated UV light operation and functionality to ensure proper installation and performance. Replaced UV light component to meet manufacturer specifications and system requirements.