Bessemer, AL

Installed new square metal trunk line and flexible duct runs as part of a duct system reduction, improving airflow distribution and system efficiency. Sealed all connections and supported the ductwork to meet industry standards. Work is backed by a 5-year parts and 1-year labor warranty.

Performed a scheduled service agreement maintenance visit on the heating system under warranty coverage, which includes a ductwork-mounted UV light. Inspected the system's components, including the reduct/encapsulated ductwork section and the UV unit, and verified proper operation of the heating equipment.

I can't write an accurate job description from what was provided. The service details contain only a heading ("Service Agreement Visit -") with no information on the work performed, equipment serviced, readings taken, or issues found. Please share the details of the visit, such as the system type (HVAC, plumbing, electrical), tasks completed, parts replaced, and any problems diagnosed or resolved. I'll then write a concise, professional summary for the service record.

Completed installation of a square metal trunk and flexible duct run system for the HVAC distribution network, ensuring proper sizing, secure connections, and sealed joints to maintain airflow efficiency and minimize air leakage. Ductwork was properly supported and insulated per industry standards, with the installation backed by a 5-year parts and 1-year labor warranty.

Completed a preventive protection visit inspecting the attic-mounted air handler and the Trane gas furnace system, including condensate drain piping with float safety switch, refrigerant line insulation, electrical connections, plenum and duct sealing, and equipment labeling. All components were found in good condition with no visible frost, rust, or damage; only minor dust and wear were noted on the furnace-area ductwork.

Performed a clean and check on the gas furnace, including inspection of the burner assembly, which revealed heavy rust and corrosion on the burner tube faces and slotted ports. Removed and examined the burners, ignition components, and associated brackets, and documented the corrosion as a condition that may affect flame quality and combustion performance. Recommend monitoring the burner condition and evaluating for replacement if combustion issues develop.

Responded to a service call for furnace performance issues and performed a complete system inspection and diagnostic evaluation. Tested the thermostat, ignition components, flame sensor, gas supply, blower assembly, and safety controls, then identified and corrected the fault affecting heating operation. After repairs, verified proper cycling, airflow, and burner operation to confirm the furnace is functioning safely and within manufacturer specifications.

Installed a new square metal trunk line with flexible duct runs as part of an HVAC ductwork replacement. Connected and sealed all trunk and branch duct runs to ensure proper airflow distribution and system efficiency. The installation includes a 5-year parts warranty and a 1-year labor warranty.

Performed the first service agreement visit on two heating systems as part of the scheduled maintenance plan. The 7H7A unit was identified as not manufactured or serviced by our company, and no UV light system was present on the equipment.

I can't write an accurate summary from this input. The service details ("DR BY BRADY. Drive By - DR BY BRADY") don't describe any actual work performed, such as the trade, the equipment involved, the problem found, or the actions taken. Writing a description from that would mean inventing technical details, which wouldn't be reliable for a service record. Please provide specifics such as the type of service (e.g., HVAC, plumbing, electrical), the issue observed or reported, and the actions completed. Once I have those, I'll produce a concise, professional job description.

Responded to a service call regarding visible microbial growth in an HVAC system equipped with a UV germicidal light installed in June 2024. Inspected the system and UV lamp to assess operation and identify potential causes of the growth, including lamp function, placement, and conditions contributing to moisture or contamination. Evaluated the system's effectiveness and discussed findings and recommended next steps for remediation.

Performed a service agreement visit to diagnose reported furnace issues. Inspected the unit's major components, including the ignition system, flame sensor, burners, blower assembly, heat exchanger, and air filter, and verified thermostat operation and safety controls. Cleaned and adjusted components as needed, confirmed proper combustion and airflow, and tested the system through a full heating cycle to verify normal, safe operation.

Performed a seasonal clean and check on the heating and air conditioning systems, inspecting and servicing both units to verify proper operation and efficiency. The system includes a UV-C germicidal light, which was checked for proper function, and the equipment is covered under an active warranty.

Performed first scheduled service agreement visit on the heating system under active warranty coverage. Inspected and tested system components for proper operation, verified the UV light is installed and functioning, and confirmed the system is operating within normal parameters.

Performed the first scheduled service agreement visit on the heating and cooling system, including a chemical cleaning of the outdoor condenser coil, with the unit and surrounding pad rinsed of cleaning solution residue afterward. The unit was out of warranty, and no UV light was installed on the system.

Completed a moisture control turnover for crawl space encapsulation and indoor air quality (IAQ) improvement. Reviewed the scope of work covering vapor barrier installation, moisture mitigation, and air quality measures to reduce humidity, prevent mold growth, and improve overall air quality within the home.

Performed the first service agreement visit on the heating and cooling system, including inspection of the evaporator coil, which showed dirt and debris buildup and a nest-like clump near the drain pan rail, and cleaning of the furnace flame sensor to remove carbon residue and restore reliable flame sensing. Inspected the burner assembly, gas valve, and wiring connections, and treated components as needed to ensure safe, proper ignition. System operation was verified after service; recommend a UV light installation and future evaporator coil cleaning to maintain efficiency and indoor air quality.

Diagnosed and addressed issues with the quick connect (QC) and garage lighting circuits. Inspected the affected fixtures, connections, and wiring to identify the cause of the malfunction, then performed the necessary repairs to restore proper operation of the garage lights and QC components.

Installed new square metal trunk line with flexible duct runs and reducer transitions to properly distribute airflow throughout the system. Sealed and secured all connections, then verified balanced airflow at the registers. Installation includes 5-year parts and 1-year labor warranty coverage.

I can't write an accurate job description from the details provided. The service information only says "premium adc. ADC - premium adc," which doesn't describe what work was actually performed, what equipment was involved, or what issues were resolved. Writing technical specifics from this would mean inventing details for a service record, which could make the record inaccurate. If you can share information such as the type of equipment or system serviced, the symptoms or problems reported, the diagnostic steps taken, the repairs or maintenance completed, and the parts replaced or adjustments made, I'll write a concise, professional summary right away.

Installed a new square metal trunk line with flexible duct branch runs and a reducer-style transition to balance airflow throughout the system. All connections were sealed and secured to ensure proper air distribution and system efficiency. Installation includes a 5-year parts and 1-year labor warranty.

I can't write an accurate job description from what was provided. The service details contain only the label "Service Agreement Visit -" with no information about the work performed, equipment serviced, or issues found or resolved, and the trade is shown as "None." If you share the actual visit details, such as the system type (HVAC, plumbing, electrical), the maintenance tasks completed, the readings or findings, and any repairs made, I'll write a concise, professional summary right away.

Completed turnover indoor air quality service, including inspection and cleaning of the HVAC system components to remove accumulated dust and debris. Replaced the air filter, verified proper airflow and system operation, and confirmed the unit is functioning correctly for the incoming occupancy.

Performed a comprehensive clean and check on the unit, including cleaning of key components, removal of accumulated debris, and inspection of critical operating parts. Verified proper operation and system performance, and confirmed the unit is functioning within normal parameters.

Performed comprehensive Clean & Check service on outdoor heat pump unit as part of new customer introductory maintenance visit. Completed thorough inspection of aged residential system showing environmental wear, surface corrosion, and dirt accumulation on cabinet and coil surfaces. Cleaned condenser coils, verified fan operation through circular grille assembly, and assessed overall system condition including concrete pad placement and clearance around unit.