Ashville, AL

Responded to service call for frozen HVAC unit. Diagnosed cause of freeze-up condition, which typically results from restricted airflow due to dirty air filter, blocked return vents, low refrigerant charge, or malfunctioning blower motor. Thawed evaporator coil, identified and corrected underlying issue to restore proper system operation and prevent recurrence.

Completed encapsulation carpet cleaning process on commercial carpeting. Applied encapsulation cleaning solution using rotary machine with bonnet pads to lift and crystallize soil particles, followed by grooming to ensure even distribution and proper drying.

Completed initial Protection Plan Visit for HVAC system. Performed comprehensive inspection of heating and cooling equipment, including filter check, thermostat calibration, electrical connection verification, and condensate drain assessment. System operating within normal parameters with no immediate service needs identified.

Completed initial turnover and commissioning of indoor air quality system. Performed comprehensive testing and verification of all IAQ components and equipment. System operational and ready for service.

Completed encapsulation of ductwork system to seal and protect against air leakage and contamination. Applied specialized encapsulation material to all accessible duct surfaces, ensuring proper coverage and adhesion throughout the system. Verified integrity of encapsulation upon completion to maintain improved air quality and system efficiency.

Completed encapsulation of ductwork system to seal and protect against air leakage, moisture infiltration, and energy loss. Applied specialized encapsulation material to all accessible duct surfaces, ensuring proper adhesion and coverage throughout the system. Verified encapsulation integrity and confirmed improved system efficiency upon completion.

Completed first service agreement visit for air conditioning system. Performed comprehensive system inspection, checked refrigerant levels, cleaned condenser coils, replaced air filter, and verified proper operation of all components. System is operating within manufacturer specifications and ready for the cooling season.

Completed initial service call for new customer to perform equipment turnover. No air conditioning system was present at the property requiring equipment setup and installation preparation. Documented site conditions and equipment requirements for future installation work.

Completed encapsulation of ductwork system to seal and protect against air leakage, moisture infiltration, and contaminant exposure. Applied specialized encapsulation coating to all accessible ductwork surfaces, ensuring proper adhesion and coverage throughout the system. Verified integrity of encapsulation upon completion to meet industry standards for improved energy efficiency and indoor air quality.

Completed routine preventive maintenance service agreement visit on HVAC system. Performed comprehensive inspection of heating and cooling equipment, changed air filters, checked refrigerant levels, tested thermostat operation, cleaned condensate drain lines, and verified all safety controls were functioning properly. System found to be operating within manufacturer specifications with no immediate repairs required.

Provided comprehensive estimate for moisture control solutions focusing on encapsulation and ductwork sealing. Assessment included evaluation of crawlspace or affected areas requiring vapor barrier installation and ductwork treatment to prevent condensation and moisture intrusion. Recommended encapsulation system and ductwork modifications to address humidity issues and improve overall environmental conditions.

Performed comprehensive Clean & Check maintenance on air conditioning system with history of previous operational issues. Conducted thorough inspection of all components, cleaned condenser and evaporator coils, checked refrigerant levels, tested electrical connections, and verified proper system operation. All maintenance tasks completed successfully to ensure optimal cooling performance and system reliability.

Completed equipment turnover for air conditioning system that previously experienced operational issues. Transferred unit to CBAI for equipment assessment and indoor air quality evaluation. Documented historical AC performance concerns and coordinated handoff with receiving party for further diagnostics and remediation.

Responded to initial service call for new customer reporting no air conditioning. Performed diagnostic assessment of HVAC system to identify cause of cooling failure and provided recommendations for repair or service needed to restore proper operation.

Provided technical assistance with copper line installation and troubleshooting. Collaborated with field technician to complete repairs and ensure proper system operation.

Completed initial Service Agreement visit for two air conditioning units. Performed comprehensive system inspections, including evaluation of refrigerant levels, electrical components, condensate drainage, and overall operational performance on both units. All systems found to be functioning within normal parameters at time of service.

Completed routine protection visit inspection of HVAC system. Verified proper operation of heating and cooling components, checked thermostat calibration, inspected electrical connections, and replaced air filter. All equipment found to be functioning within normal parameters with no immediate service needs identified.

Installed A2L sensor and control mitigation board at customer facility per work order specifications. Completed installation and integration of safety monitoring system to ensure proper refrigerant detection and control functionality.

Responded to callback for cooling system issue. Diagnosed and addressed the root cause of inadequate cooling performance. Verified system operation and confirmed unit is now functioning properly with adequate airflow and temperature output.

Completed service agreement visit for air conditioning system as first call of the week. Performed routine maintenance inspection, checked refrigerant levels, tested system operation, and verified all components were functioning within manufacturer specifications. System found to be operating properly with no issues identified.

Completed initial service call for new customer who contacted company through online search. Assessed property and discussed service needs to establish working relationship and determine appropriate solutions moving forward.

Responded to service call for SASC unit not cooling. Diagnosed system malfunction, identified root cause of cooling failure, and performed necessary repairs to restore proper operation. Unit tested and verified to be cooling effectively upon completion of service.

# SASC Protection Visit - No Cooling Issue Responded to service call for SASC unit not cooling, system approximately 5 months old. Conducted comprehensive Protection Visit inspection to diagnose cooling failure and assess overall system condition. Upon arrival, performed visual inspection of accessible ductwork and HVAC components. Documented flexible duct penetration through structural surface with spray foam insulation applied at entry point. Observed standard installation practices with corrugated flexible ducting passing through concrete or drywall surface in what appears to be attic or crawl space area. Insulation material properly sealed around duct penetration to prevent air leakage and maintain energy efficiency. Inspected basement or crawl space area where additional ductwork components are located. Noted silver reflective flexible duct running vertically along wall corner with foil-faced insulation wrap. Documented significant wall deterioration with extensive peeling pain